4'X32' WHEEL END ALUM-THRUFLOW WHITE

Roll-A-Dock
Roll-A-Dock

Let the good times roll – Setting the standard in portable dock design since 1971

Roll-A-Dock

Roll-A-Dock is simply the fastest and easiest way to get full enjoyment from your waterfront property. In cold climates, there’s no need to endure frigid water – just roll it in and you’re ready for action. Roll-A-Dock is ideally suited to gradual slopes and works equally well on soft or rocky bottoms. A basic dock can be easily placed using a vehicle or installed in a matter of minutes by as few as two people.

Roll-A-Dock

Easy Adjustment Over a Wide Range of Depths

A built-in winch with removable hand crank allows quick height adjustment for different depths or changing water levels. Adjustments are easily made without ever stepping into the water. Standard Model adjusts from 2-1/2’ to 5-1/2’. Deep Water Kit adjusts from 2-1/2’ to 8’.

4′ and 6′ Widths, Aluminum or Galvanized Steel

While some portable docks are as narrow as 36”, Roll-A-Dock gives you the choice of 4’ or 6’ wide models – plenty of room for people to meet and pass. Select all-aluminum construction for low weight and easy handling or galvanized steel for maximum strength.

Double Bracing

Double Bracing

Roll-A-Dock’s unique “V” type bracing reduces the clear span on a 32’ dock to only 21’. This design gives the wheel assembly superior strength both front and rear and assures maximum stability on soft or rocky bottoms.

Double Strength Connections

Double Strength Connections

With Roll-A-Dock’s exclusive connecting system, there is no loss of strength, even at the joints. The integrity of this design makes it possible to have a steel frame dock up to 32’ in length that requires no extra supports.

Bridged Framework

Bridged Framework

The Roll-A-Dock tapered frame incorporates design principles proven in bridge and rafter construction. This design provides maximum strength with a minimum of weight. The open sides of the frame also improve stability by reducing wave resistance.

Winch Operation

Winch Operation

The height adjusting winch is operated with a removable hand crank that is inserted in an opening in the deck surface. Height adjustments can be made while standing on the deck.

Inboard Mounted Winch and Cable

Inboard Mounted Winch and Cable

The height adjusting winch and cable is located inside the dock frame for greater safety. There are no exposed parts to snag – nothing to damage your boat when you pull along side.

Optional Small Heavy Duty Hinge

Optional Small Heavy Duty Hinge

Recommended for use on longer, multi-section docks over 48' long equipped with two or more wheel bases.

DECKING & LAYOUTS

SKID GUARD

SKID GUARD

CEDAR

CEDAR

ALUMINUM

ALUMINUM

THRUFLOW

THRUFLOW


Design Your Own Dock Layout

Roll-A-Dock is easily lengthened with add-on sections or expanded to form “T”s, “L”s or side platforms. A wide variety of accessories is also available. Add-on sections can be attached to one or both sides. Available sizes: 2′, 4′, 6′ widths, and 4′, 8′, 16′ lengths. Custom sizes also available. Shown below are just a few possible layouts.

Design Your Dock

Built Better to Better Meet Your Needs

With the strength of its design, Roll-A-Dock can be extended to virtually any length you need. The basic starter unit is a 16’ long wheel-end assembly. 4’, 8’ and 16’ add-on sections can be connected to make a single free-span dock up to 48’ long. For greater lengths, simply install a dock hinge and continue adding sections with wheel kits and supports. Ramps, triangular sections and side sections are also available to complete your installation. Roll-A-Dock will provide a lifetime of service. All-aluminum frames, galvanized steel frames and all other components have been designed for low maintenance and superior resistance to corrosion.

 

 

 

 

 

 

 

 

Roll-A-Dock Catalog

4'X32' WHEEL END ALUM-THRUFLOW WHITE

4'X32' WHEEL END ALUM-THRUFLOW WHITE

4'x32' Roll-A-Dock: Wheels, Winch, 16' Wheel End, 16' Shore End, (2)5' Pole Sets

HEWITT WARRANTY

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to HEWITT lifts, docks, and canopies.

LIMITED WARRANTY

New HEWITT-built docks, with the exception of floating docks and rafts, carry a 15-year conditional warranty on all aluminum and aluminum welds. Floating docks and rafts carry a 2-year conditional warranty. Aluminum decking (excluding paint) is covered by a separate 5-year conditional warranty.

HEWITT Machine and Manufacturing, Inc. warrants all HEWITT-built docks and accessories purchased new by original owner to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply). Aluminum decking is separately warranted for a period of five years. Warranty is void when misuse or neglect is the cause. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection, they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Unless otherwise noted this warranty agreement is the only warranty agreement between the parties. This agreement states the limits and association of risk between the two parties. Customer acknowledges understanding of this warranty and agreement and binding to the terms contained within.

 

OTHER MANUFACTURER’S WARRANTIES

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Flotation tanks carry a manufacturer’s 12 year warranty.

Specifications are subject to change without notice. Made in the USA.

 

PATENT NUMBERS

6,612,775 | 6,907,835  |  6,983,707  |  7,051,665  |  7,267,066  |  7,156,030  |  7,318,385  |  8,430,045  |  9,950,772


 

BOAT LIFT WARRANTY

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt lifts, docks, and canopies.

LIMITED WARRANTY

New HEWITT-built boat and pontoon lifts carry a 15 year conditional warranty on all aluminum and aluminum welds. A 5 year conditional warranty on BoatPort galvanized steel and welds. A 5 year conditional warranty on BoatPort polyethylene tanks.

A 5 year conditional warranty on vinyl and SeaMark canvases, excluding fading.

HEWITT Machine and Manufacturing, Inc. further warrants all other parts used on HEWITT-built lifts and accessories, purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply.) Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Unless otherwise noted this warranty agreement is the only warranty agreement between the parties. This agreement states the limits and association of risk between the two parties. Customer acknowledges understanding of this warranty and agreement and binding to the terms contained within.

OTHER MANUFACTURER’S WARRANTIES

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Hydraulic pumps and hoses carry a manufacturer’s 2-year warranty. Hydraulic cylinders carry a manufacturer’s 1-year warranty. BoatPort controller carries a manufacturer’s 1-year warranty.

Specifications are subject to change without notice.

 

PATENT NUMBERS

6,612,775 | 6,907,835  |  6,983,707  |  7,051,665  |  7,267,066  |  7,156,030  |  7,318,385  |  8,430,045  |  9,950,772